Polygroup TG76M3P51C01 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly and
easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into
the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Please remove protective cap from middle section(s) and continue inserting into the bottom section
until the tree top is inserted.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
7. (For pre-lit trees only) Connect the plug(s) securely to the extension cord(s) as per the color labels indicated in Fig. B and insert
the green label extension cord plug into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or flickers,
search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance
and life expectancy of your pre-lit tree.
MODEL #: TG76M3P51C01
1-888-919-0070
OR
Tree Top
Section 2
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward
and snap into place.
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Insert
Green Label
Plug Into Wall
Outlet
1
*Electrical Rating For The Tree
(For Indoor Use Only)
2.38A 120V 60Hz