Polygroup Illumination Color Blast Assembly Manual

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Simple Shape™ technology, which takes less than 10 minutes to set up and light up!
Carefully follow the instructions below on how to quickly and easily set up your new tree:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Remove protective cap, and insert the center pole
into the stand. Then slot together the remaining poles securely until the tree top is installed.
5. Plug the adaptor into the wall outlet (See Fig. B). Your entire tree should now be lit.
6. This is a Simple Shape TM tree, which shaping is not required. Just slightly upsweep all tips and shift
branches to fill in any gaps for a fuller, uniform look. Your Christmas tree is now ready to be decorated.
MODEL #: TG76P4781L10
Polygroup®!
Tree Top
Section 2
This tree comes with Quick Set® and
Unfold tree stand legs. Then
slide the locking disc down until
it snaps into place.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120VAC, 60Hz
Output: 24VDC,60Hz,2.0A
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Plug Adaptor
Into Wall
Outlet
1