In access point mode, your ZyXEL G-220 v2 functions as an access point. This allows you to
set up your wireless network without using a dedicated AP device. Up to 16 wireless stations
can associate to the ZyXEL G-220 v2 to form a wireless network. Refer to
page 25
and
Note: With WZC, you cannot use the ZyXEL G-220 v2 as an access point.
1.7.1 Change ZyXEL G-220 v2 Mode
To change between the modes, select either the Station Mode or AP Mode option in any
ZyXEL Utility screens.
Figure 8 ZyXEL Utility: Change Modes
Note: Wait for about five seconds for the ZyXEL Utility to complete the mode change.
The current mode is indicated by the color of the check box.
1.8 ZyXEL Utility Screen Summary
This sections describes the ZyXEL Utility screens.
Chapter 1 Getting Started
Chapter 4 on page 53
for more information.
ZyXEL G-220 v2 User's Guide
Section 1.7.1 on
25