Advertisement
Installation
Do not use the flow sensor, connecting tubing or damper shaft as a lift point. Damage to the components
may result.
NOTICE: Unit is not recommended for installation above 2,000 m.
The Dual Duct terminal should be supported directly with straps screwed into the side of the terminal. (See figure 1)
Alternate trapeze hangers or the method prescribed for the rectangular duct on the job specification may be used.
(See figure 2)
4
Dual Duct VAV Terminals
CAUTION: HAZARD OF EQUIPMENT DAMAGE
Figure 1 - Hanging Straps
Figure 2 -Trapeze
Advertisement
