Table of Contents
Advertisement
General Information
To ensure a successful installation, the instructions in this manual should be read and adhered to. Failure to comply
with proper installation procedures may void the warranty.
Unit and System Identification Tags
Each fan has a permanently affixed manufacturer's engraved metal nameplate containing the model number and
individual serial number.
The tag shown is an example of an identification label on the fan. The
information provides general details about the fan, as well as containing
specific information unique to the unit. When contacting your Greenheck
representative with future needs or questions, please have the information on
this label available. Tags are mounted in an area which is clearly visible, usually
on the side of the fan housing.
ERS and Vektor fan systems may arrive in component pieces due to shipping
restrictions. Individual components of a system have matching identification tags which should be used to identify
and assemble the complete system. Assembling systems with different identification tags can cause reductions in
the fan(s) performance.
Pre-Installation Checks
Prior to fully assembling and installing the ERS plenum cabinet and Vektor fan bypass plenum components, inspect
plenums, coils, and fan assembly to make sure they are in working order.
System Components
Bolt-On ERS
Fan Bypass
Air Plenum
(BAP)
Vektor-M Compact
ERS Sizes 5, 8, 15
®
Length
ERS
Plenum
Cabinet
Vektor-M Standard ERS
Sizes 20, 30, 40, 60
Gasket
ERS
Plenum
Cabinet
Fan Bypass
Roof Curb
Vektor-ERS Energy Recovery Plenum Laboratory Exhaust
Height
Fan Bypass
Air Plenum
(BAP)
Apply
Force
Air Plenum
(BAP)
Vektor-C ERS
Sizes 25, 35, 40, 55, 65
3
Con
In
Du
Ga
(by
Advertisement
Table of Contents
