Table of Contents
Advertisement
• If the plug after installation is not accessible, a corresponding disconnect device must be available to meet
the relevant safety regulations.
Before using your dishwasher for the first time:
Before using your dishwasher for the first time:
Before using your dishwasher for the first time:
Before using your dishwasher for the first time:
A. Filling salt into the salt container (water softener)
B. Fill the rinse aid dispenser
C. Fill in detergent
CAUTION:
CAUTION:
CAUTION:
CAUTION:
• Use only salt, rinse aid and detergent for dishwashers. Other products may damage the appliance.
• Always consider the dosage and storage recommendations on the sales packaging.
WARNING:
WARNING:
WARNING:
WARNING:
Keep salt, rinse aid and detergent out of reach for children.
A A A A . Filling salt into the salt container
. Filling salt into the salt container (water softener)
. Filling salt into the salt container
. Filling salt into the salt container
Water softener
Water softener
Water softener
Water softener
The water hardness varies regionally. If hard water is used in the dishwasher, deposits form on the dishes and
kitchen utensils. The appliance is equipped with a water softener, that removes lime and minerals from the
water by using water softening in the salt container. Your local water authority can advise you on the hardness
of the water in your area.
Adjusting the salt consumption
Adjusting the salt consumption
Adjusting the salt consumption
Adjusting the salt consumption
The salt consumption can be adjusted according to your water hardness and therefore optimally regulated.
• Switch on the appliance using the power button.
• Press the start/pause button within the first 60 seconds for about 5 seconds. The warning lamps for rinse
aid and salt lights up when the appliance is in setting mode.
• By repeatedly pressing the start/pause button, the water hardness can be changed accordingly:
H1->H2->H3->H4->H5->H6. The display shows the setting.
• A few seconds after the completion of your choice the water hardness is automatically saved. Alternatively
the setup can be closed via the power button.
The following settings are recommended:
Water hardness
Water hardness
Water hardness
Water hardness
°dH*
°dH*
°Clark*
°Clark*
°dH*
°dH*
°Clark*
°Clark*
0 – 5
0 – 6
6 – 11
7 – 14
12 – 17
15 – 21
18 – 22
22 – 28
23 – 34
29 – 42
35 – 55
43 – 69
Prior Using for the first Time
Prior Using for the first Time
Prior Using for the first Time
Prior Using for the first Time
(water softener)
(water softener)
(water softener)
mmol/l
mmol/l
mmol/l
mmol/l
0 – 0.94
1.0 – 2.0
2.1 – 3.0
3.1 – 4.0
4.1 – 6.0
6.1 – 9.8
8
Settings / Display
Settings / Display
Settings / Display
Settings / Display
H1
H2
H3 (factory setting)
H4
H5
H6
Salt consumption
Salt consumption
Salt consumption
Salt consumption
(gramm/cycle)
(gramm/cycle)
(gramm/cycle)
(gramm/cycle)
0
9
12
20
30
60
Advertisement
Table of Contents
