Prior Using For The First Time - BOMANN GSP 864 Instruction Manual

Table of Contents

Advertisement

• Always make sure that the hose is not bent or
squeezed.
• Install the hose maximal up to a height of 1000
mm above the rinsing floor.
• Secure the drain hose securely to avoid a change
in position and with it a water leakage.
Electrical connection
Electrical connection
Electrical connection
Electrical connection
WARNING:
WARNING:
WARNING:
WARNING:
• The installation to the mains supply must conform
to the local standards and regulations.
• Improper connection may cause to an electric
shock!
shock
shock
shock
• Do not use multiple sockets or extension cords.
• It is not allowed to modify the plug provided with
the appliance! If the plug does not fit properly to
the outlet, let install a proper outlet by an author-
ized specialist.
• The accessibility of the power plug must always
be ensured in order to disconnect the device from
the power supply in case of an emergency.
• Make sure that the voltage supply matches the
specifications on the rating label (door frame) be-
fore connecting.
• Connect the mains cable to a properly installed
and earthed wall outlet.
• If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
• Connect the drain hose to a
drain pipe (B) with a mini-
mum diameter of 40 mm;
alternatively the drain hose
can be fixed directly to the
sink (A).
electric
electric
electric

Prior Using for the first Time

Prior Using for the first Time
Prior Using for the first Time
Prior Using for the first Time
Before using your dishwasher for the first time:
Before using your di
Before using your di
Before using your di
A. Filling salt into the salt container (water softener)
B. Fill the rinse aid dispenser
C. Fill in detergent
CAUTION:
CAUTION:
CAUTION:
CAUTION:
• Use only salt, rinse aid and detergent for dish-
washers. Other products may damage the appli-
ance.
• Always consider the dosage and storage recom-
mendations on the sales packaging.
WARNING:
WARNING:
WARNING:
WARNING:
Keep salt, rinse aid and detergent out of reach for
children.
A. Filling salt into the salt container (water softener)
A. Filling salt into the salt container (water softener)
A. Filling salt into the salt container (water softener)
A. Filling salt into the salt container (water softener)
Water softener
Water softener
Water softener
Water softener
The water hardness varies regionally. If hard water is
used in the dishwasher, deposits form on the dishes
and kitchen utensils. The appliance is equipped with
a water softener, that removes lime and minerals
from the water by using water softening in the salt
container. Your local water authority can advise you
on the hardness of the water in your area.
Adjusting the salt consumption
Adjusting the salt consumption
Adjusting the salt consumption
Adjusting the salt consumption
The salt consumption can be adjusted according to
your water hardness and therefore optimally regulat-
ed.
• Turn on the appliance.
• Press the Start/Pause button for more than
5 seconds, the setting mode is now activated for
approx. 60 seconds.
• By repeatedly pressing the Start/Pause button the
water hardness can be selected: H1->H2->H3
->H4->H5->H6. The display indicates the selec-
tion (see below table).
7
shwasher for the first time:
shwasher for the first time:
shwasher for the first time:

Advertisement

Table of Contents
loading

Table of Contents