Reference A L Help; Reference Bl - Tandy 102 Owner's Manual

Reference Al
llelp
T his reference helps with prob-
lems you may encounter. while
going through this manual. For
additional help, see the
Tandy 102 Applications and
BAS IC Reference Guide .
110 I References
General
R ed battery light on.
When the
lig ht first comes on, you have 20
minutes of battery power left.
Immediately turn the power off,
I
and insert new batteries or use
the AC power cord . •
Screen and k eyboard freezes.
This could be caused by several
I
factors: {I) An operation may be
in progress. Press ( SH IF Tl and
I
then !
BRE AK
l at the same time.
Try this several times. (2) The
Tandy 102 may be hung up. At
last resort, press Reset, the small
button on the rear of the Tand y
I 02 next to the RS232C connec-
tor.
Try this several times.
Cannot return to Main Menu.
Press one of the following keys:
CE.ID,
the spacebar, or ( SH IF T l
( BREAK
J
(at the same time).
No files are on the Main
I
Menu.
Check the Memory
Switch o n the bottom of the
Tandy 102. If it is off, a ll the
contents in RAM have been per-
manently erased.
I
Screen blank.
Use the DISP dial
on the right side of the Tandy
102 to adjust your display. If
this does not help, turn the
power switch o ff a nd back on
again. Then check for dead bat-
teries or an improperly connected
AC power cord.
I