Advertisement
Mechanical Installation
NOTE!
Prohibit the flow of water inside the tubing water into the machine!
3
NOTE!
Drilling a hole in the wall is required before cutting a hole in the
rear. To guarantee easy installation of the conduit and sealing with
the chassis, the hole's size must be greater than the conduit's
outside diameter.
4
28
Lock nut, waterproof gasket(outside),
conduit
The top of the nut and contact surface of
the threads must be cleaned after locking
the nut, as well as the contact surface between
the nut and the box.
TSE-382 waterproof adhesive
or a similar performance glue.
4. Mechanical Installation (Wall-mounting)
1
Cylindrical plastic
bubble spirit level
Ground
Note: The distance from the Base to
the ground is decided according to
the local regulations.
Φ8 drill for wooden wall
1.97 in/ 50 mm
2
Mechanical Installation
M5
17.7 lbf.in / 2.0 N·m
Φ12 drill for concrete wall
Depth:
Depth:
3.54 in/ 90 mm
29
Advertisement
