LT3BC | USER MANUAL
5.2 Connectors and pinout
The M12 straight plug male connector is schematized in Figure
functionality of the pins are shown in Table 10.
It is important to notice that the variants with ZZZ
connectors. Furthermore the variant LT3BC500500 exhibit three connectors. In all cases, the only
connector used both for power supply and for the input signal to the controller is the one with the
external label, while any others need only be connected for power supply (Pin 1) and ground (Pin
3).
Figure 5: Scheme of the connector pinout (device side).
NOTE: It is strongly recommended to use same length cables for the models that require two or
more power inputs.
v1.1 - eng
Pin
1
2
3
4
5
Table 10: Connector pinout.
CAUTION: The device can be damaged if the wrong connections are made.
5
in order to show the
or YYY
300
300
Standard
Power +
V
24
dc
NPN
GND
PNP
Analog dimming
pins. The
5
(see Section 2) exhibit two
17