Photobiological Safety - opto engineering LT3BC Series User Manual

LT3BC | USER MANUAL
heat (if necessary, operate the device with a forced air cooling system).
Environment specifications
Operating temperature
Storage temperature
Operating temperature humidity
Installation
IP rating
In general, avoid to store and use the product in the following environments:
• Environments with strong electric/magnetic fields.
• Places exposed to direct sunlight, rain or snow.
• Environments exposed to particular gas and dangerous substances.
• Extremely vibrating systems.
• Dusty places.
• Extremely humid places.
• Excessive hot/cold environments.

3.4 Photobiological safety

LT3BC series has been tested against EN 62471:2008 (photobiological safety of lamps and lamp
system). The norm classifies LED lightings in 4 distinct groups, according to their hazardousness
v1.1 - eng
Table 4: Environment operating specifications.
CAUTION: Product case temperatures can highly differ in case of poor heat
dissipation. The product implements a thermal shutdown protection in order
to avoid excessive damage to the internal electronics.
CAUTION: If used outside of the specified temperature range, the expected life
of the product might consistently decrease. Opto Engineering® will not be re-
sponsible for product life reduction due to excessive thermal stress.
Values
0-40 C
0-50 C
20-85%, non condensing
Indoor use only
IP54
10