Revisions - opto engineering LT3BC Series User Manual

LT3BC | USER MANUAL
• This device has limited protection against transients caused by inductive loads. If necessary, use
external protection devices like fast diodes or other specific transient protectors;
• Do not allow foreign objects to enter the unit or drop into holes, terminals and other openings
or gaps. This may cause fire or electric shock, possibly resulting in serious injury;
• Disconnect the power cable before moving the product. Failure to comply with this precaution
may damage the power cable or cause fire or electric shock, possibly resulting in serious injury;
• Do not scratch, cut, open or twist the power cables. It may cause malfunctioning, fire or electric
shock, possibly resulting in serious injury;
• If the power cable is damaged or cracked, please contact our technical support and do not use
the product. Damaged cables may cause malfunctioning, fire or electric shock, possibly resulting
in serious injury;
• Do not insert or remove the plug of the power cable with wet hands. It may cause electric shock,
possibly resulting in serious injury;
• Do not use the product in presence of flammable gas. It may cause outbreaks and flames, pos-
sibly resulting in serious injury;
• If you notice any abnormality such as smell, smoke or overheating, turn off the power and dis-
connect the power cables. Continuing to use the product in these conditions may cause fire or
electric shock, possibly resulting in serious injury;
• If you have dropped the product or damaged the product case, turn off the power and disconnect
the power cables. Continuing to use the product in these conditions may cause fire or electric
shock, possibly resulting in serious injury.

1.3 Revisions

In Table 1 are listed all the user manual revisions.
In the column Description are listed all the relevant differences between different revisions.
Rev. Date
1.0 07/02/2024
v1.1 - eng
Description
First manual release
Table 1: Manual revisions
4