Table of Contents
Advertisement
SLEEP TIMER operation
■ The unit will stop automatically after the set time lapses.
The set temperature is automatically adjusted according to the lapse time in order to avoid too much cooling or heating.
Changing of set time
Set a new time by pressing SLEEP button.
How to cancel
Press the CANCEL button to turn off the SLEEP
display.
OFF TIMER operation
■ The unit stops automatically when the set time comes.
When the air-conditioner is turned off, start the operation from Step 1. When the air-conditioner is running, start from Step 2.
Changing of set time
Set a new time by using the OFF TIMER button.
How to cancel
Press the CANCEL button to turn off the timer
display.
RLH012A503_EN.indd 18
RLH012A503_EN.indd 18
1
Press the SLEEP button.
If it is pressed while the unit is off
■
SLEEP TIMER operation starts with the previous operation settings, and the
air-conditioner is turned off after the set time lapses.
If it is pressed while the unit is running
■
The air-conditioner is turned off after the set time lapses.
Every time the button is pressed, the display changes as follows:
No display
(canceled)
Example: You prefer it to stop after 3 hours.
The timer light (yellow) is on.
Set to
The unit stops after the set time lapses.
NOTICE
• SLEEP TIMER operation cannot be set simultaneously with OFF TIMER
operation or ALLERGEN CLEAR operation.
Example: You prefer it to stop 22:30.
1
Press the ON/OFF button.
2
Press the OFF TIMER button.
OFF TIMER display
is flashing.
3
Press the TEMP/TIMER button.
Every time the
button is pressed, the display is switched in the order of:
...
0:00
0:10
0:20
Every time the
button is pressed, the display is switched in the order of:
... 23:00 22:50
0:00 23:50 23:40
Set at 22:30.
4
Press the OFF TIMER button.
The display changes from flashing to steady lighting and the setting is
complete.
The timer light (yellow) is on.
NOTICE
• The unit stops at the end of the set period of time.
• Make sure to press the button within 60 seconds from the last operation
in step 3, otherwise the setting is not completed.
• The current time is not displayed during OFF TIMER operation.
• OFF TIMER operation will not function during ALLERGEN CLEAR
operation.
• Different from SLEEP TIMER operation, automatic set temperature
adjustment is not done during OFF TIMER operation.
EN-18
Page 20
... (Units of one hour)
1:00
1:10
(Units of ten minutes)
(Units of ten minutes)
2023/04/28 10:33
2023/04/28 10:33
Advertisement
Table of Contents
