Table of Contents
Advertisement
OFF-TIMER operation procedure
The unit stops automatically at the end of the set period of time. When the current status
of the air conditioner in stop, start from Procedure l, if it is under operation status, start fr-
om Procedure 2.
Example: You wish it to stop at 22:30 p.m.
Aim the remote control at the air conditioner.
Make the air conditioner operation.
Off-timer
Press the
indication
Press the
"OFF"indicator
Press the
Each time
switched in the order of:
Each time
switched in the order of:
Set it to 22:30.
Change the set time
Press the
Set a new time by using the
(Press within 60 seconds!)
button.
Indicator stop flashing but still tum on,setting
will be finished.
Releasing the OFF-TIMER
The timer light (yellow) is on.
Press
button and the timing
indicator will be closed.
The unit stop when reach the set time.
button.
button.
will flash.
or
button.
button is pressed, the indicator is
(In ten minutes)
button is pressed, the indicator is
(In ten minutes)
button.
"SLEEP" operation+"ON-TIMER" operation procedure
Joint operation of the "SLEEP"function and "ON-TIMER"function.
Example:If you wish it to stop after 3 hours, start operation
at 8:00 and make the room temperature access to the set
one.
Setting of "SLEEP" operation
Set according to the operation method on Page 55
and then set to
.
Setting of "ON-TIMER" operation method
Set to
by the "ON-TIMER" operation procedure
above.
When the timing pilot lamp (yellow) is lightened, it
means that the setting has been finished.
After reaching the set time of "SLEEP" operation, the
air conditioner will stop operation automatically and
then start operation 5-60 minutes before "ON-TIMER".
The unit stop when reach the set time.
Change the set time
Releasing the "SLEEP"+ "TIMER"
Set a new time by using the
Press
button and the timing indicator will be
or
button.
closed.
"Procedure timer" operation procedure
Timing operation includes the setting of ON-TIMER and OFF-TIMER. Once setting is
carried out, operation starts as well. The air conditioner will start and stop operation in the
same time of each once the "ON/OFF" button is not pressed.
Example:You wish it to stop at22:30p.m.,start operation
at 8:00 and make the temperature access to the set one.
Setting of "OFF-TIMER" operation
Set according to the operation method on Page 57:
set to
.
Setting of "ON-TIMER" operation
Set according to the operation method on Page 56:
set to
.
The timer light (yellow) is on.
The time will be displayed on the remote control and
the display will be changed according to the operation
status.
(Stop)
Change the set time
Set a new time by using the
Terminate procedure timer operation
Press
button and the timing indicator will be
closed.
(Run)
or
button.
RYD012A379
Advertisement
Table of Contents
