Table of Contents
Advertisement
Contact your dealer
■ Turn off the power switch immediately and inform your dealer in any of the following situations:
• The fuse or switch blows continuously.
• The cable becomes extremely hot.
The covering of the cable is cracked.
• The TV, radio or other equipment starts to malfunction.
• A switch does not activate properly.
• A strange noise is heard during operation.
• When abnormalities occur, turn off the power source immediately and turn it on after 3 minutes. Restart the operation with ON/OFF
button of the remote control and the abnormalities still continue.
• The RUN and TIMER lights on the unit display section flash quickly (in a 0.5 seconds interval) or the lights do not work.
Auto restart function
■ Auto restart function records the operational status of the air-conditioner immediately prior to be switched off by a power cut, and then
automatically resumes operations after the power has been restored.
■ The following settings will be canceled:
• Timer settings
• HIGH POWER operations
NOTICE
• Auto restart function is set at on when the air-conditioner is shipped from the factory. Consult with your dealer if this function needs
to be switched off.
• When power failure occurs, the timer setting is canceled. Once power is resumed, set the timer again.
RLH012A503_EN.indd 33
RLH012A503_EN.indd 33
EN-33
2023/04/28 10:33
2023/04/28 10:33
Advertisement
Table of Contents
