Table of Contents
Advertisement
Instructions for use
Activating and adjusting cooking zones
selected cooking zone/power
After switching the hob on, position a pot on the required cooking zone.
Activate the cooking zone by pressing the relative round key: the round key displays number
corresponds to the intermediate power level.
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions
for your induction hob, the message "no pot" will appear in the display (see figure on the left). If no pot is
detected within 60 seconds, the hob switches off.
0.
To change the power level, move your finger horizontally on the slide touchscreen: the number inside
the circle changes from a minimum of 1 to a maximum of 9 depending on the position of the finger on the
touchscreen. The booster function can be activated by pressing "BOOST" on the slide touchscreen ("P" on
the display). The "BOOST" power level can be used for up to 10 minutes, after which the appliance
automatically switches to level 9. If more than one cooking zone is on, the slide touchscreen allows you to
change the power of the selected zone, indicated by the presence of a luminous dot at the bottom right of
the power indicator. To select a zone, simply press the relative round key.
i
In models with three cooking zones, it is possible set 3 "BOOST" functions at the same time: in this
case, the appliance automatically adjusts the distribution of power between the zones.
Deactivating cooking zones
Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the
bottom right of the power level indicator). Press OFF on the slide touchscreen.
The cooking zone switches off and, if the zone is still hot, the letter "H" appears in the circle.
"H" is the residual heat indicator. The hob has a residual heat indicator for each cooking zone; these
indicators alert the user when cooking zones are still hot. When the cooking zone cools down, the display
switches off.
Timer selection
The timer can be used to set a max. cooking time of 90 minutes.
Select the cooking zone to be used with the timer (a luminous dot appears at the bottom right of the
power level indicator on the display), then set the required time using the + and - keys of the timer
function: the time in minutes is shown next to the cooking zone display.
A few seconds after the last press, the timer begins the countdown (the cooking zone selection dot starts
flashing).
Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.
For the timer associated with the SENSOR function, refer to the description of the function on the
following pages.
Control panel lock
This function locks the hob controls to prevent accidental activation (e.g. during cleaning).
Press the
key for three seconds: an acoustic signal sounds and an indicator light turns on above the lock
symbol to confirm activation. The control panel is locked with the exception of the OFF function. To
Cooking zone timer
55
Cooking zone selection and
level display
Slide touchscreen
(power adjustment)
0
13
0
that
Advertisement
Table of Contents
