Ryobi RY40240 Operator's Manual page 35

LED FUNCTIONS FOR BATTERY CHARGING
See Figure 2, page 7.
BATTERY RED
PACK LED
Power On
Plugged into AC
p o w e r s u p p l y
without battery
pack
Testing
Hot battery pack
OFF
Cold battery pack
Error
Error Flashing
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED Error status repeats a second
time, try charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual for instructions).
• If a different battery also indicates Error, the charger should be replaced.
Charging Battery Pack
Fast charging OFF
Battery Pack is Ready
OFF
Battery full
*Charger LED will remain ON for approximately 5 minutes when charging is complete. When the battery is
100% charged, the battery LEDs will all turn off.
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 6
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
GREEN ORANGE
LED LED
ON OFF OFF
OFF ON
Flashing OFF
Flashing OFF
ON* OFF
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com
ILLUSTRATIONS START ON PAGE 7.
Ready to charge battery pack.
When battery pack reaches cooled temperature, charger begins charge
mode.
When battery pack reaches warmed temperature, charger begins
charge mode.
Battery pack or charger error.
Battery is being charged.
Battery charging is complete.
5 — English
ACTION