Advertisement
Quick Links
SUMAKE
Test result according to
Vibration
MODEL
EN ISO 28927-5
No Load: 1.6 m/s 2
CD39
No Load: 1.7 m/s 2
CD48
No Load: 1.7 m/s 2
CD58
Uncertainty K= 1.5 m/s²
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
.
3 In 1 Straight-Cushion Type
Air Drill/Screwdriver
EN 11148-3:2012
Sound pressure level
No Load: 76 dB(A)
No Load: 77 dB(A)
No Load: 77 dB(A)
PNEUMATIC TOOLS
Noise : EN ISO 15744
Sound power level
No Load: 87 dB(A)
No Load: 88 dB(A)
No Load: 88 dB(A)
Uncertainty K= 3dB
Safety Instructions
Warning
Read this manual and
1-
understand all safety
instructions before operation
the tool.
Wear an approved ear-
2-
protector and gloves while
.
operating tool
CD39(48)(58)-S-2301F-MIF
Advertisement
Related Manuals for Sumake CD39
Summary of Contents for Sumake CD39
- Page 1 Wear an approved ear- protector and gloves while operating tool No Load: 1.7 m/s 2 CD58 No Load: 77 dB(A) No Load: 88 dB(A) Uncertainty K= 1.5 m/s² Uncertainty K= 3dB CD39(48)(58)-S-2301F-MIF SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91...
-
Page 2: Ec Declaration Of Conformity
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 3 IN 1 STRAIGHT-CUSHION TYPE 3/8" AIR DRILL/SCREWDRIVER Model/ Serial No.： CD39, CD48, CD58 to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC and conforms to the following EN standard, ... -
Page 3: Air Supply
O.A.L Dia. Fastening Min. air Torque Speed Capacity hose bore Consumption range (Hard Joint) r.p.m. m³/min CD39 1600 1022 0.55 CD48 1700 1000 0.55 CD58 1000 0.55 13.0 OPERATIONS 1. Precision adjustment has been made around case, gear and rotating section. -
Page 4: Parts List
CD48 3 IN 1 STRAIGHT-CUSHION TYPE 3/8" AIR DRILL/SCREWDRIVER PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 5A6029 End Housing 1P2102 10T Plate Gear 2S3010 Inner Bushing 1P6294 Third Gear Cage 2S6001 Outer Bushing 1G6271 21T Main Gear 2U6001 Switch Bushing 1P6111... - Page 5 DRILL Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 Safety precautions for repetitive motions hazards 1. When using a drill to perform work-related activities, the operator can experience discomfort in the hands, arms, shoulders, neck or other parts of the body. 2. While using a drill, the operator should adopt a comfortable posture whilst maintaining a secure footing and avoiding awkward or off-balanced postures.
- Page 8 Specific safety instructions Warnings shall be given about any specific or unusual hazards associated with the use of the drill. Such warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet.
Need help?
Do you have a question about the CD39 and is the answer not in the manual?
Questions and answers