Advertisement
SUMAKE
Specification:
Free
Chuck
Speed
MODEL
r/min
inch
1/4"
CDD26
2900
Recommend Air Pressure: 6.0 kg/cm²
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
.
PNEUMATIC TOOLS
Pistol-Direct Driven Type
Air Drill
Torque range
Min. air
(Hard Joint)
hose bore
Nm
Ft-lb
mm
3.5
2.6
5
Noise and Vibration:
Vibration
EN ISO 28927-5
Sound pressure level
No Load: 0.8 m/s²
No Load: 72 dB(A)
Uncertainty K= 1.5 m/s²
Noise
EN ISO 15744
Sound power level
No Load: 83 dB(A)
Uncertainty K= 3dB
CDD26-S-2111H-MIF
Remark
Please always
wear ear
protector at
environment
noise level >
80 dB(A) due
to risk of
impaired
hearing!
Advertisement
Table of Contents
Related Manuals for Sumake CDD26
Summary of Contents for Sumake CDD26
- Page 1 No Load: 72 dB(A) No Load: 83 dB(A) environment noise level > 80 dB(A) due to risk of impaired Recommend Air Pressure: 6.0 kg/cm² Uncertainty K= 1.5 m/s² Uncertainty K= 3dB hearing! CDD26-S-2111H-MIF SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91...
-
Page 2: Ec Declaration Of Conformity
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： PISTOL-DIRECT DRIVEN TYPE AIR DRILL Model/ Serial No.： CDD26 to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC and conforms to the following EN standard, ... - Page 3 Application: SUMAKE Drills are light weight with sturdy construction, which used in woodworking, metalworking, and construction; for drilling holes in various materials or fastening various materials together with the use of fasteners. Operation Method: Use clamps or another practical way to secure and support the workpiece to a stable platform.
- Page 4 CDD26 1/4" PISTOL-DIRECT DRIVEN TYPE AIR DRILL CDD39 3/8"PISTOL-DIRECT DRIVEN TYPE AIR DRILL (KEYLESS CHUCK) CDD26(39)-P-1306L-MI...
-
Page 5: Parts List
1P2275 18T Main Gear [CDD39] 2C2003-A Blank Cap 1P2110 12T Plant Gear [CDD39] 7Q2006 O Ring 29-1 1P2105 15T Plant Gear [CDD26] 7Q6112 Valve O-Ring 1P2291 Third Gear Cage [CDD39] 6S2023 Valve Pin 30-1 1P5112 Fifth Gear Cage [CDD26] 6N2106... - Page 6 DRILL Original instructions SUMAKE Industrial Co. Ltd.
- Page 7 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 8 Safety precautions for repetitive motions hazards 1. When using a drill to perform work-related activities, the operator can experience discomfort in the hands, arms, shoulders, neck or other parts of the body. 2. While using a drill, the operator should adopt a comfortable posture whilst maintaining a secure footing and avoiding awkward or off-balanced postures.
-
Page 9: Specific Safety Instructions
Specific safety instructions Warnings shall be given about any specific or unusual hazards associated with the use of the drill. Such warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet.
Need help?
Do you have a question about the CDD26 and is the answer not in the manual?
Questions and answers