Advertisement
Quick Links
SUMAKE
Air Drill & Screwdriver (Alu.)
Test result according to
Vibration
MODEL
EN ISO 28927-5
ACDN48
No Load:
ACDN58
No Load:
ACDN458
No Load:
Uncertainty K= 1.5 m/s²
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
.
PNEUMATIC TOOLS
Trigger To Start Cushion
EN ISO 11148-3:2012
Sound pressure level
No Load:
0.4 m/s2
75.5 dB(A)
No Load:
0.5 m/s2
75.6 dB(A)
No Load:
0.5 m/s2
75.6 dB(A)
Noise : EN ISO 15744
Sound power level
No Load:
86.5 dB(A)
No Load:
86.6 dB(A)
No Load:
86.6 dB(A)
Uncertainty K= 3dB
Safety Instructions
Warning
1- Read this manual and understand
all safety instructions before
operation the tool.
2- Wear an approved ear-protector
and gloves while operating tool.
ACDN48(58)(458)-S-2305D-MIF
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake ACDN48
Summary of Contents for Sumake ACDN48
- Page 1 75.6 dB(A) 86.6 dB(A) and gloves while operating tool. ACDN458 No Load: No Load: No Load: 0.5 m/s2 75.6 dB(A) 86.6 dB(A) Uncertainty K= 1.5 m/s² Uncertainty K= 3dB ACDN48(58)(458)-S-2305D-MIF SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91...
-
Page 2: Ec Declaration Of Conformity
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： TRIGGER TO START CUSHION AIR DRILL & SCREWDRIVER (ALU.) Model/ Serial No.： ACDN48(58)(458) to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... -
Page 3: Air Supply
(Hard joint) Lever Capacity r.p.m. ±2dBA m /min ACDN39 1,600 0.75 0.28 ACDN45 0.75 0.28 ACDN48 1,700 1.10 0.55 ACDN58 1.10 0.55 13.0 ACDN458 1.10 0.55 13.0 OPERATIONS 1. Precision adjustment has been made around case, gear and rotating section. - Page 6 ACDN48 TRIGGER TO START CUSHION AIR DRILL & SCREWDRIVER (ALU.) ACDN48-P-1209B-MI...
- Page 7 ACDN48 TRIGGER TO START CUSHION AIR DRILL & SCREWDRIVER (ALU.) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 5L2034 Pistol Housing (Sky Blue) 1S3157 Internal Gear 7Q2008 O Ring 7S2010 Ball Bearing 2C2003 Blank Cap 5A5354 Clutch Housing...
- Page 8 DRILL Original instructions SUMAKE Industrial Co. Ltd.
- Page 9 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 10 Safety precautions for repetitive motions hazards 1. When using a drill to perform work-related activities, the operator can experience discomfort in the hands, arms, shoulders, neck or other parts of the body. 2. While using a drill, the operator should adopt a comfortable posture whilst maintaining a secure footing and avoiding awkward or off-balanced postures.
- Page 11 Specific safety instructions Warnings shall be given about any specific or unusual hazards associated with the use of the drill. Such warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet.
Need help?
Do you have a question about the ACDN48 and is the answer not in the manual?
Questions and answers