Advertisement
SUMAKE
Specification:
Free
Chuck
Speed
MODEL
r/min
inch
CDD39A
1600
3/8"
Recommend Air Pressure: 6.0 kg/cm²
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
.
PNEUMATIC TOOLS
Pistol-Direct Driven Type
Air Drill
Torque range
Min. air
(Hard Joint)
hose bore
Nm
Ft-lb
mm
5.0
3.7
5
Noise and Vibration:
Vibration
EN ISO 28927-5
Sound pressure level
No Load: 0.9 m/s²
No Load: 73.6 dB(A)
Uncertainty K= 1.5 m/s²
Noise
EN ISO 15744
Sound power level
No Load: 84.6 dB(A)
Uncertainty K= 3dB
CDD39A-S-2111I-MIF
Remark
Please always
wear ear
protector at
environment
noise level >
80 dB(A) due
to risk of
impaired
hearing!
Advertisement
Table of Contents
Related Manuals for Sumake CDD39A
Summary of Contents for Sumake CDD39A
- Page 1 No Load: 73.6 dB(A) No Load: 84.6 dB(A) noise level > 80 dB(A) due to risk of impaired hearing! Recommend Air Pressure: 6.0 kg/cm² Uncertainty K= 1.5 m/s² Uncertainty K= 3dB CDD39A-S-2111I-MIF SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91...
-
Page 2: Ec Declaration Of Conformity
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： PISTOL-DIRECT DRIVEN TYPE AIR DRILL Model/ Serial No.： CDD39A to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... - Page 3 Application: SUMAKE Drills are light weight with sturdy construction, which used in woodworking, metalworking, and construction; for drilling holes in various materials or fastening various materials together with the use of fasteners. Operation Method: Use clamps or another practical way to secure and support the workpiece to a stable platform.
-
Page 4: Parts List
CDD39A 3/8" PISTOL-DIRECT DRIVEN TYPE AIR DRILL (KEY CHUCK) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 5L2107 Pistol Housing 1P3062 Front Plate 7Q2008 O Ring 7S2002 Ball Bearing 2C2003-A Blank Cap 1P2275 18T Main Gear 7Q2007 O Ring... - Page 5 DRILL Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 Safety precautions for repetitive motions hazards 1. When using a drill to perform work-related activities, the operator can experience discomfort in the hands, arms, shoulders, neck or other parts of the body. 2. While using a drill, the operator should adopt a comfortable posture whilst maintaining a secure footing and avoiding awkward or off-balanced postures.
-
Page 8: Specific Safety Instructions
Specific safety instructions Warnings shall be given about any specific or unusual hazards associated with the use of the drill. Such warnings shall indicate the nature of the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet.
Need help?
Do you have a question about the CDD39A and is the answer not in the manual?
Questions and answers