scenario.
7. When all of the above are done, do not forget to give the "write
memory" command under the enable mode to save your configuration.
What is IEEE 802.1Q Tag-based VLAN?
Tag-based VLAN Overview
•
Regarding IEEE 802.1Q standard, Tag-based VLAN uses an extra tag in the MAC
header to identify the VLAN membership of a frame across bridges. This tag is used
for VLAN and QoS (Quality of Service) priority identification. The VLANs can be
created statically by hand or dynamically through GVRP. The VLAN ID associates a
frame with a specific VLAN and provides the information that switches need to
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ES-3100 Series Switch Support Notes
40