Electrolux EOK9S8B0 User Manual page 25

7. Fill the remaining part of the water drawer
with water to the maximum level.Fill the
remaining part of the water drawer with
700 ml of water, until the signal sounds or
the display shows the message.
8. Turn on the function and follow the
instruction on the display. The first part of
descaling starts.
Duration of the second part: around 35
min
9. Fill the water drawer with water. Make
sure there is no remaining descaling
agent inside the water drawer. Insert the
water drawer. Fill the water drawer with
950 ml of water, until the signal sounds or
the display shows the message.
10. When the function ends, remove the deep
pan.
11. Turn off the appliance and wait until it is
cold.
12. Clean the oven interior with a soft cloth.
13. Remove the remaining water from the
water drawer.
14. Leave the oven door open and wait until
the cavity is dry.
If some limestone residue remains in the
oven after descaling, the display prompts to
repeat the procedure.
11.8 Descaling reminder
There are two reminders which prompt you to
descale the appliance. You cannot disable
the descaling reminder.
• Soft reminder - recommends you to
descale the appliance.
• Hard reminder - obligates you to descale
the appliance. If you do not descale the
appliance when the hard reminder is on,
the steam functions are disabled.
11.9 Rinsing
Use it to clean the steam system after
frequent use of the steam functions.
1. Turn off the appliance and wait until it is
cold.
2. Remove all accessories.
3. Place the deep pan on the first shelf
position.
4. Fill the water drawer with water.Fill the
water drawer with water to the maximum
level until the signal sounds or the display
shows the message.
5. Select: Menu / Cleaning / Rinsing.
Duration: around 30 min
6. Turn on the function and follow the
instruction on the display.
7. When the function ends, remove the deep
pan.
When this function works, the lamp is off.
11.10 Drying
Use it after cooking with a steam heating
function or steam cleaning to dry the cavity.
1. Turn off the appliance and wait until it is
cold.
2. Remove all accessories.
3. Select: Menu / Cleaning / Drying.
4. Follow the instruction on the display.
11.11 Drying reminder
After cooking with a steam heating function
the display prompts to dry the appliance.
Press YES to dry the appliance.
11.12 Tank emptying
Use it after cooking with steam heating
function to remove the residual water from
the water drawer.
1. Turn off the appliance and wait until it is
cold.
2. Remove all accessories.
3. Place the deep pan on the first shelf
position.
4. Select: Menu / Cleaning / Tank emptying.
Duration: 6 min
5. Turn on the function and follow the
instruction on the display.
6. When the function ends, remove the deep
pan.
When this function works, the lamp is off.
11.13 Removing and installing the
door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
ENGLISH 25