Table of Contents
Advertisement
Viewing on TV Screen
r.---"- , . -.:-^-=====r==g^7^g==r
Use the provided AV input/output cable to connect the DVD video camera/recorder to a TV as follows:
J Turn the TV on and set the input selector to
"VCR" whichever applicable Video input.
Refer to the TV instruction manual for how to
switch the TV input.
2 Set the power switch to "8i VIDEO" or
"f~3 PHOTO" to turn the DVD video camera/
recorder on.
The image that the DVD video camera/recorder
is seeing will appear on the TV screen. You can
also monitor the image on the LCD screen or
viewfinder of the DVD video camera /recorder.
^ Perform playback or recording.
Turn down TV volume in record mode, or feed¬
back could result.
Note: Information that the DVD video camera/
recorder is recording will appear on the TV screen:
You can also display only part of information or
switch off the display Refer to "Switching On-Screen
Display Output On or Off" on page 60. and press
the DISPLAY button to switch the display status.
Note: When copy-guarded disc Is played back,
no image will appear on TV screen.
Note: If you use TV with wide mode (aspect ratio
16:9) and set the TV to the wide mode, the Disc
Navigation screen may malfunction. If this hap¬
pens, release the wide mode setting on TV (see
the TV instruction manual for releasing the wide
mode).
89
Advertisement
Table of Contents
