Download Print this page

Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl RMA 443.3 V Instruction Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
English
and at less than 70% humidity. Higher humidity
may increase the drying time.
21.8
Sound Values and Vibration
Values
RMA 443.3 V
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2.2 dB(A). The K value for the vibration value is
0.70 m/s².
– Sound pressure level L
ance with EN IEC 62841-4-3: 75 dB(A)
– Guaranteed sound power level L
ured in accordance with 2000/14/
EC / S.I. 2001/1701: 90 dB(A)
– Vibration value a
, handlebar, measured in
hv
accordance with EN IEC 62841-4-3: 1.40 m/s²
RMA 448.3 V
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2.0 dB(A). The K value for the vibration value is
0.90 m/s².
– Sound pressure level L
ance with EN IEC 62841-4-3: 79 dB(A)
– Guaranteed sound power level L
ured in accordance with 2000/14/
EC / S.I. 2001/1701: 94 dB(A)
– Vibration value a
, handlebar, measured in
hv
accordance with EN IEC 62841-4-3: 1.80 m/s²
The indicated vibration values were measured in
accordance with a standardised test method and
can be used for the purpose of comparing electri‐
cal appliances. The actual vibration values that
occur may deviate from the indicated values,
depending on the type of application. The indica‐
ted vibration values can be used for an initial
assessment of the vibration load. The actual
vibration load must be assessed. Times during
which the electrical appliance is switched off,
along with times during which it is switched on
but running without load, can also be taken into
consideration.
For information on compliance with Employers'
Vibration Directive 2002/44/EC and
S.I. 2005/1093, see www.stihl.com/vib.
21.9
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
56
measured in accord‐
pA
meas‐
WAd
measured in accord‐
pA
meas‐
WAd

22 Spare Parts and Accessories

For information on compliance with the REACH
regulation see www.stihl.com/reach.
22 Spare Parts and Accesso‐
ries
22.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22.2
Essential Spare Parts
– Blade:
– RMA 443.3 V: WA40 702 0105
– RMA 448.3 V: WA41 702 0105
– Blade fastening screw with
washer: 0000 951 3505

23 Disposal

23.1
Disposing of lawn mower, bat‐
tery and charger
Information on disposal is available from your
local authority or from a STIHL specialist dealer.
Improper disposal may be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose of the product with domestic
waste.
24 EC Declaration of Con‐
formity
24.1
Lawn Mower
STIHL RMA 443.3 V,
RMA 448.3 V
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
0478-131-9671-B

Advertisement

loading

This manual is also suitable for:

Rma 448.3 v