Mitsubishi Electric Mr. SLIM PEA-M100HAA Operation Manual page 5

2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic."
The factory setting is "Full."
<Full mode>
⑫ ⑬ ⑭ ⑮ ⑯
⑥
⑦
⑧
⑨
⑩
①
⑪
⑱
▌ ① Operation mode
Indoor unit operation mode appears here.
▌ ② Preset temperature
Preset temperature appears here.
▌ ③ Clock
Current time appears here.
▌ ④ Fan speed
Fan speed setting appears here.
▌ ⑤ Button function guide
Functions of the corresponding buttons appear here.
▌ ⑥
Appears when the ON/OFF operation is centrally controlled.
▌ ⑦
Appears when the operation mode is centrally controlled.
▌ ⑧
Appears when the preset temperature is centrally controlled.
▌ ⑨
Appears when the filter reset function is centrally controlled.
▌ ⑩
Indicates when filter needs maintenance.
▌ ⑪ Room temperature
Current room temperature appears here.
▌ ⑫
Appears when the buttons are locked.
⑰
③
⑲
④
②
⑤
<Basic mode>
①
▌ ⑬
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
▌ ⑭
Appears when the Weekly timer is enabled.
▌ ⑮
Appears while the units are operated in the energy-save mode.
▌ ⑯
Appears while the outdoor units are operated in the silent mode.
▌ ⑰
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature ( ⑪ ).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
▌ ⑱
Appears when the preset temperature range is restricted.
▌ ⑲
Appears when an energy-saving operation is performed using a "3D
i-See sensor" function.
②
⑤
③
④
5