Advertisement
Reassembly
Step
Names of Parts
Inner paper guide
@ Paper feeding roller
@ Paper feeding
shaft
spring
@ Paper feeding shaft
holder
@ Paper feeding gear
SP (61.5x6)
x1
R-1 (2.3)
x1
Points of Assembly Work
<POINT
IN DISASSEMBLY >
Inner paper guide
Flat segment
Frame unit
Outer paper guide assy
@ After assembling parts @ to ©, mount the subassembly onto the frame
unit as follows.
@ Mount parts © to @ on the grooveed side of the paper feeding shaft.
@ After pressing SP onto the shaft, fit SP securely into the groove in the
paper feeding gear.
@ After parts
@ to@® are assembled, mount this subassembly into the frame
unit.
@ Fit one end of the paper feeding shaft spring into the groove in frame
T and the other end into the groove on the inner paper guide.
@ Mount the paper feeding shaft holder from the inside of frame T, then
tighten R-1.
<CHECK>
@ The paper feeding rolier should rotate smoothly.
@ Press the paper feeding roller shaft several times in the
arrow direction
to check that it slides lightly.
Inner paper guide
Paper feeding shaft holder
Frame T
Paper feeding
shaft spring
Paper feeding shaft
Advertisement
