Advertisement
3.2.1
Subassembly
Subassembly
A | Ribbon Unit
Ranseomly)
Names of Parte
Points of Assembly Work
Ribbon frame
Spool gear T
@ Do not confuse spool gears T and S.
Spool gear S
Spool gear brake
@ While inserting the brake spring into the groove in the spool gear, slide
spring
x2
it in the ® arrow direction to mount it onto the dowel on the back of the
ribbon frame.
@ Make sure the brake springs are correctly oriented (the side with the
crown faces downward).
< Frame T side >
A
«Frame S side
Spool gear T
|
aN.
Spool
gear S
+
)
X
ay pool
g
@ Attach the spring to the hole in the ribbon feeding pawl and to the ribbon
detecting lever shaft.
Spool gear
brake sprina
Ribbon
feeding
pawl
spring
Spool gear T
Ribbon detecting
lever shaft
—~40-
Advertisement
