Ninja SFP700EU Instructions Manual page 23

USING YOUR NINJA COMBI - CONT.
Bake
1 Reference the Inspiration Guide for direction
on how to assemble ingredients and
accessories based on recipes/charts.
2
Move SmartSwitch to AIR FRY/Cooker, then
use the FUNCTION arrows to select BAKE.
The default temperature setting will display.
Use the up and down arrows to the left of
the display to choose a temperature from
120°C to 210°C.
3
Use the up and down arrows to the right of the
display to adjust the cook time up to 4 hours
in 1 minute increments.
4 Press START/STOP to begin cooking.
NOTE: The unit will preheat for 3 minutes
before the timer starts.
5 When cook time reaches zero, the unit
will beep and "End".
44 ninjakitchen.eu
Reheat
1 Be sure to position the Cook & Crisp tray in the
bottom of the pot.
2
Move SmartSwitch to AIR FRY/Cooker, then
use the centre arrows to select REHEAT. Use
the up and down arrows to the left of the
display to choose a temperature.
3 Use the up and down arrows to the right of the
display to adjust the reheat time.
4 Press START/STOP to begin cooking.
5 When cook time reaches zero, the unit will
beep and "End".
Sear/Sauté
1 Begin by adding ingredients to the Combi
Cooker Pan and inserting into the Level 1
position.
2
Move SmartSwitch to AIR FRY/Cooker then
use the FUNCTION arrows to select SEAR/
SAUTÉ. Use the up and down arrows to the
left of the display to select "Lo1," "2," "3," "4,"
NOTE: There is no time adjustment available
when using the Sear/Sauté function.
or "Hi5."
3 Press START/STOP to begin cooking. The
timer will begin counting up.
4 Press START/STOP to turn off the SEAR/
SAUTÉ function. To switch to a different
cooking function, press START/STOP to
end the cooking function then use the
SmartSwitch and center front arrows to
select your desired function.
NOTE: You can only use this function with the
door open.
NOTE: ALWAYS use nonstick utensils in the
Combi Cooker Pan. DO NOT use metal utensils,
as they will scratch the nonstick coating on
the pot.
NOTE: SEAR/SAUTÉ will automatically turn
off after 1 hour for "4" and "Hi5" and 4 hours
for "LO1," "2," and "3."
Slow Cook
1 Before getting started, ensure that you are
only using the Combi Cooker Pan without the
Crisper Tray.
2
Move SmartSwitch to AIR FRY/Cooker, then
use the FUNCTION arrows select SLOW
COOK. The default temperature setting will
display. Use the up and down arrows to the
left of the display to select "Hi," "Lo."
3 Use the up and down arrows to the right of
the display to adjust the cook time.
4 Press START/STOP to begin cooking.
NOTE: The SLOW COOK LO time setting
may be adjusted between 6 and 12 hours. The
SLOW COOK HI time setting may be adjusted
between 4 and 12 hours.
5 When cook time reaches zero, the unit will
beep, automatically switch to Keep Warm
mode, and begin counting up.
ninjakitchen.eu 45