Table of Contents
Advertisement
Code
Message
33
FAX
35
DATA
40
+MRR: 300
44
+MRR: 1200/75
45
+MRR: 75/1200
46
+MRR: 1200
47
+MRR: 2400
48
+MRR: 4800
49
+MRR: 7200
50
+MRR: 9600
51
+MRR: 12000
52
+MRR: 14400
53
+MRR: 16800
54
+MRR: 19200
55
+MRR: 21600
56
+MRR: 24000
57
+MRR: 26400
58
+MRR: 28800
59
CONNECT 16800
61
CONNECT 21600
62
CONNECT 24000
63
CONNECT 26400
64
CONNECT 28800
66
+DR: ALT
67
+DR: V.42B
69
+DR: NONE
70
+ER: NONE
77
+ER: LAPM
78
+MRR: 31200
79
+MRR: 33600
80
+ER: ALT
81
+ER: ALT-
CELLULAR
83
LINE IN USE
84
CONNECT 33600
91
CONNECT 31200
134
+MCR: B103
135
+MCR: B212
3-80
Command Reference Manual
Table 3-15. Result Code Definitions (Cont'd)
A fax modem connection is established in a facsimile mode.
A data modem connection is established in a facsimile mode.
The modem has connected to the line at 300 bps and carrier reporting is enabled. (See S95 and Xn.)
The V.23 backward channel carrier is detected and carrier reporting is enabled. (See S95 and Xn.)
The V.23 forward channel carrier is detected and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 1200 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 2400 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 4800 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 7200 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 9600 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 12000 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 14400 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 16800 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 19200 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 21600 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 24000 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 26400 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 28800 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line, the DTE speed is 16800 bps and DTE speed reporting is enabled.
The modem has connected to the line, the DTE speed is 21600 bps and DTE speed reporting is enabled.
The modem has connected to the line, the DTE speed is 24000 bps and DTE speed reporting is enabled.
The modem has connected to the line, the DTE speed is 26400 bps and DTE speed reporting is enabled.
The modem has connected to the line and either the line speed is 28800 bps and DCE speed reporting is
enabled, or the DTE speed is 28800 bps and DTE speed reporting is enabled.
The modem has connected to the line in MNP Class 5 and +DR: message reporting is enabled. (See S95,
Wn, and Xn.)
The modem has connected to the line in V.42 bis and +DR: message reporting is enabled. (See S95, Wn,
and Xn.)
The modem has connected to the line without data compression and +DR: message reporting is enabled.
(See S95, Wn, and Xn.)
The modem has connected to the line without any form of error correction and the +ER: message reporting
has been enabled. (See S95, Wn, and Xn.)
The modem has connected to the line in V.42 LAPM error correction mode and +ER: message reporting
has been enabled. (See S95, Wn, and Xn.)
The modem has connected to the line at 31200 bps and carrier reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 33600 bps and carrier reporting is enabled. (See S95 and Xn.)
Sent when the modem has connected in the MNP mode of error correction, and +ER: message reporting
has been enabled. (See S95, Wn, and Xn.)
The modem has connected in the MNP 10 mode and cellular power level adjustment is enabled (")M1 or
)M2").(See S95, Wn, and Xn.)
The modem attempted to go off-hook when an extension was already occupying the line.
The modem has connected to the line, the DTE speed is 33600 bps and the DTE speed reporting is
enabled.
The modem has connected to the line DTE speed is 31200 bps and the modem is to report the DTE speed
upon connecting.
The modem has connected to the line with Bell 103 modulation and modulation reporting is enabled. (See
+MR, S95 and Xn.)
The modem has connected to the line with Bell 212 modulation and modulation reporting is enabled. (See
+MR, S95 and Xn.)
Meaning
1199
Advertisement
Table of Contents
