Main Technical Characteristics; Completeness Of The Device; Safety Precautions - Open System Mega Tester V4 Technical Description And Instruction Manual

Insulation resistance
Resistance of the piezoelectric element
Capacitance of the piezoelectric element
Gap measurement range
Piezoelectric element voltage setting range
Voltage setting range for insulation test
Accuracy of resistance measurement
Accuracy of voltage measurement
Capacitance measurement accuracy
Nominal supply voltage
Network frequency
Maximum power consumption
Maximum current consumption
Operating temperature range
Storage temperature
Relative humidity (non-condensing)
"Mega Tester" device
Universal cable for measuring electrical parameters and
testing piezoelectric element operation
Power cable
Passport
The device may only be operated by persons who are at least 18 years of age
and who have been given appropriate training and have studied the technical
documentation for this device.
Do not operate the device with any parts of the housing removed or missing.
Before switching on the device and/or before applying mains voltage to the
device, make sure that the device body is not mechanically damaged and that the
insulation of all cables and connectors is intact. Also, make sure that the device body
and all cables and connectors are free of moisture, dust and other contaminants.
Do not operate the device with any damage to the insulation of cables and
connectors.
1
at test voltages below 300V, the resistance measurement accuracy is not standardised.

4. MAIN TECHNICAL CHARACTERISTICS

5. EQUIPMENT OF THE DEVICE

6. SAFETY PRECAUTIONS

1MΩ...10MΩ
100kΩ...1MΩ
0.5...10 µF
1...15 µm
20...160В
1
50...1000В
±2%+3ppm
±1% + 2ppm
±0.3 µF
220В
50Hz
10W
0,25А
0 to +35 °С
from -10 to +50
°С
0 - 85%
1 pc.
1 pc.
1 pc.
1 pc.
5