Table of Contents
Advertisement
Preventing material damage
2 Preventing material damage
Preventing material damage
NOTICE:
The functionality of the appliance may be impaired if you
use the wrong quantity of fabric softener, detergent, care
product or cleaning agent.
Follow the dosage recommendations from the
▶
manufacturer.
Only use fabric softeners or products to eliminate static
▶
that are specifically recommended for this purpose by
the product manufacturer.
Exceeding the maximum load capacity impairs the
function of the appliance.
Observe the maximum load capacity for each
▶
programme and do not exceed it.
→ "Programs", Page 16
The function of the appliance may be impaired if the
appliance overheats.
Keep the ventilation opening on the appliance clear
▶
during operation.
Make sure that the area is adequately ventilated.
▶
Light objects such as hair and lint may be sucked in from
the ventilation opening on the appliance during operation
and impair the function of the appliance.
Keep the area around the appliance clean during
▶
operation.
Keep light objects away from the appliance.
▶
If you operate the appliance without a lint guard (e.g. lint
screen, lint collector, filter mat, etc., depending on
appliance specifications), or if the lint guard is incomplete
or defective, this may result in damage to the appliance.
Do not operate the appliance without a lint guard, or
▶
with a lint guard that is incomplete or defective.
Foam or foam rubber may deform or melt during the
drying process.
Do not dry laundry that contains foam or foam rubber.
▶
Unsuitable cleaning agents may damage the surfaces of
the appliance.
Do not use strong or abrasive cleaning agents.
▶
Do not use cleaning agents with a high alcohol content.
▶
Do not use hard scouring pads or cleaning sponges.
▶
Clean the appliance with nothing but water and a soft,
▶
damp cloth.
Remove all detergent residue, spray residue or other
▶
residues immediately if they come into contact with the
appliance.
3 Environmental protection and
Environmental protection and energy-saving
energy-saving
Environmental protection and energy-saving
3.1 Disposal of packaging
The packaging materials are environmentally compatible
and can be recycled.
Sort the individual components by type and dispose of
▶
them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Operate the appliance in a well-ventilated room and keep
the ventilation opening on the appliance clear.
a If air exchange is impeded, this extends the program
duration and increases energy consumption.
Spin the laundry in the washing machine before drying.
a Damper laundry extends the program duration and
increases energy consumption.
Observe the program's maximum load capacity.
→ "Programs", Page 16
a If the maximum load is exceeded, this extends the
program duration and increases energy consumption.
After drying, clean the lint screen → Page 20 .
a If the lint screen is dirty, this reduces the air flow in the
appliance, extends the program duration, and increases
energy consumption.
Deactivate Wi-Fi on the appliance if it is not being used.
→ "Deactivating Wi-Fi on the appliance", Page 24 .
a If the Wi-Fi is activated, this increases energy
consumption.
3.3 Energy-saving mode
If you do not use the appliance for an extended period, it
automatically switches to energy-saving mode. All displays
go out and
flashes.
Energy-saving mode ends when you use the appliance
again.
If you do not continue operating the appliance, it
automatically switches to standby mode.
Installation and connection
4 Installation and connection
Installation and connection
4.1 Unpacking the appliance
NOTICE:
Objects remaining in the drum that are not designed for
operation with the appliance may cause material damage
and damage to the appliance.
Remove these objects, along with all supplied
▶
accessories, from the drum before starting the
appliance.
Remove any packaging and protective covers
1.
completely from the appliance.
→ "Disposal of packaging", Page 7
Check the appliance for visible damage.
2.
Open the door.
3.
Remove any accessories from the drum.
4.
Preventing material damage en-us
7
Advertisement
Table of Contents
