Table of Contents
Advertisement
en-us Basic Operation
Clean the two lint screens thoroughly under warm,
8.
running water and then dry them off.
Close the two lint screens and put them together.
9.
Insert the two-part lint screen.
10.
Close the door.
11.
22
11.12 Condensation container
If you have connected the condensation container, your
appliance uses this to collect any condensation.
Note: Operate this appliance using the water outlet hose
provided.
If you connect the water outlet hose, you do not have to
regularly empty the condensation container.
→ "Emptying the condensation container", Page 22
Emptying the condensation container
If the drying program has finished or the display shows a
notification while the appliance is in operation, empty the
condensation container.
Requirements
¡ The display shows the following after drying: "End"
¡ or the display shows the following during operation:
Pull out the condensation container, keeping it level.
1.
Empty the condensation container.
2.
Check the condensation container filter → Page 27
regularly, and clean the filter if it is dirty.
Make sure that you insert the condensation container
before operating the appliance.
→ "Inserting the condensation container", Page 23
.
Advertisement
Table of Contents
