Throttle Cable Adjustment (Pb-5810T Only) - Echo PB-5810 H Operator's Manual

MAINTENANCE
3. Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
"Specifications" Page of this
manual. Turn idle screw (A)
clockwise to increase idle
speed; counterclockwise to
decrease idle speed.

Throttle Cable Adjustment (PB-5810T only)

Level 1
If engine idle speed changes when blower pipe is moved, or engine will not
reach full wide open throttle speed, adjust throttle cable.
1. Loosen handle adjustment
knob (C) and tilt tube throttle
handle forward to expose
adjustment screw (D).
44
A
D
C
© 04/24 ECHO Incorporated
PB-5810 H/T
D
X7501210000