Download Print this page

Panasonic Omnivision PV-M1326 Operating Instructions Manual page 6

Hide thumbs Also See for Omnivision PV-M1326:

Advertisement

by One Time Setup
[VÍ check list before you begin.
[] Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
MENU
SELECT
UP/DOWN
To Set Language, Channel and Clock
When the Combination VCR power is first turned on, the channel auto set and
set clock screens appear automatically.
Turn the Combination
QD
VCR on.
SELECT LANGUAGE
PUSH CH UP
¡English
for on-screen displays
- Push CH UP or DOWN
O
in English or Spanish.
CKING
p
PULSE
CH DOWN:Espanol
ог
* If you choose the wrong
CH
language, please see the
"Reset all Combination VCR
Memory Functions" section on page 20.
* If you use a cable box, the cable box must be left on for
auto channel set.
Oia
If you use a cable box,
TRACK
CHANNEL! CLOCK AUTO SET
CONNECT
ANTENNA
CABLE
AND
IF YOU USE A CABLE
BOX, TUNE
IT TO YOUR
LOCAL
PBS CH
THEN...
turn it on and select PBS
' station in your time zone.
Push CH UP to start
Channel Auto Set and
Clock Auto Set.
These on-screen displays will appear in sequence.
• CH AUTO SET PROCEEDING
* CH AUTO SET COMPLETED
* AUTO CLOCK SET PROCEEDING
or
E
Y
12/25/1995 HED 12:000
SETTING
: CH
10
AUTO CLOCK
SET
CKING
»
PLEASE
PUSH
CH UP KEY
AUTO CLOCK
SET
15 INCOMPLETE
COMPLETED
PUSH
MENU TO
SET CLOCK
END
: PUSH CH UP KEY
A
Confirm that displayed time is correct and
push the CH UP button to exit.
If the displayed time and D.S.T. are incorrect,
please proceed as follows:
In the rare event that you live close to two different time zones,
the Combination VCR may recognize the wrong PBS station
as the setting channel. In this case, please do the following:
1 Make a note of the SETTING:CH number shown on-screen and
push the CH UP button to exit.
2 Delete the setting channel from the Combination VCR channel
memory. (See the Add or Delete a Channel section on the next page.)
3 Push the MENU button to display the menu.
4 Push the SELECT Up/Down and SET buttons to select "CLOCK" and
then to select "AUTO SET."
* |f you use a cable box and have multiple PBS stations,
tune the cable box to a different PBS station and try
auto clock set again using the menu.
———
————
€ —
e
es
—'
S
2.
s
——
If the screen above appears, auto clock set is
not available in your area. Please set the clock
manually as described on the next page.
* To view the deleted channel, please select with the NUMBERED keys.
NOTES
• If for any reason, the time is changed manually, automatic time correction will not occur.
* Auto clock set will be pertormed when the Combination VCR is turned off the first time each day. If you use a
cable box and you want auto clock set to be performed, the cable box must be left on and the PBS channel is
tuned at the Combination VCR power is turned off.

Advertisement

loading

This manual is also suitable for:

Omnivision pv-m1326w