Advertisement
Cancel a Timer Recording:
Recording is in progress
Hold down the STOP button for a few
seconds to cancel the Timer Recording.
• Any future daily or weekly recordings will be
performed as programmed.
Replace Program Contents:
Recording is not in progress
Push the PROG
button to display all
currently set
programs.
Push the SELECT
Up/Down and SET
buttons to select
and enter the
desired timer
recording.
(See page 16.)
P DT STRAT
STOP
CH SPD
1
p 12:00p 125 SLP
:
:
SP
4 SU
9:00р10:00р
L SLP
SELECT
1-8:PUSH
A/* KEY
ENTER
:PUSH
CANCEL
:PUSH CLEAR
KEY
END
:PUSH PROG
KEY
SELECT
STAAT
DATE
BY
SELECT
A/V KEY
USH CLEAR
:PUSH SET
>
70 END PUSH PROG KEY
Push the SELECT Up/Down and SET
buttons to select and enter replacement
information.
Push the PROG button to exit this mode
and return to the normal TV screen.
Review or Clear Program Contents:
Recording is not in progress
1
Push the PROG
button to display
all currently set
programs.
Push the SELECT
Up/Down and SET
buttons to select
the desired
program number.
Push the CLEAR
button to clear the
program.
P DT STRAT
STOP
CH SPD
н
:00p
4 SU
9:00p10:00p
L SLP
SELECT
1-8:PUSH
A/Y KEY
:
н
P DT STRAT
STOP
CH SPD
2
8 10:00p 12:00p 125 SLP
3
10
8:00p
9:00p
10
SP
4 SU
9:00р10:00р
L SLP
SELECT
1-8:PUSH
A/Y* KEY
ENTER
:PUSH SET
KEY
END
:PUSH PROG
KEY
Push the PROG button to exit this mode
and return to the normal TV screen.
e€006000000000009000600090006009000000009090000009
Timer Recording
»Using Unit Buttons
A timer recording can be set up using the buttons on the
Combination VCR. If necessary, the clock can also be set.
du
gael |
WSELECTA
SET
PROGRAM
i
- Hold down
START
STOP
CH
1) [Го]
REC/TIME.
|
SELECT START DATE
;
BY SELECT
a/¥
KEY
г
e
Ca pt es
Push FF to
enter the
program mode.
* If the clock is not set, pushing
these buttons wil! display the SET
CLOCK screen. In this case, set
the clock according to the OSD's
|setecr
: PUSH SELECT a/v
instructions and then set a timer
SET
; PUSH SET KEY
recording.
USL
daas df
* Once the Combination VCR is in the Program mode, the
PLAY, REC, FF, and REW buttons on the Combination
VCR operate only as specified above.
VE
(for down)
S
* Push SET (FF) repeatedly to move to a
particular item for setting or correction.
MANUAL SET
. Push REW or PLAY to
[>]
make your selection.
- (for up)
. Push FF to set
and move on to
the next item.
Items to be Set:
* recording DATE
* START time
* STOP time
* CH(annel), or LINE
* SPEEO (SP, LP, SLP)
When the program is completed...
(4)
` Push REC/TIME
[Je]
and FF to display
` (at the same time)
program contents.
To set the next program,
repeat steps 2, 3, and 4 before continuing with step 5.
' Push REC/TIME and
(at the same time)
* It is not possible to clear a timer program using the Combination
VCR buttons. Please use the Remote Control.
оа i-
под
DIO
Advertisement
