Advertisement
Copying Your Tapes (Dubbing)
Recording (Editing)
Combination VCR
Connections you'll need to make.
—
—
d I rie
Playing (Source) VCR
3
y
ШЇ
2925
y
c
(ШЩШ
|
Insert a pre-recorded tape
!
into the Playing (source) VCR.
Ито
Caution:
Unauthorized exchanging and/
or copying of copyrighted
recordings may be copyright
infringement.
Insert a blank tape with record
tab into the Recording (editing)
Combination VCR.
Select "LINE" as the input on the
Recording Combination VCH.
* |f you are using this Combination VCR as
the Recording unit, see "Selecting the Input
Mode" section on page 15.
Then, push PAUSE when the
tape reaches the point you want
to start copying.
оа UE)
NOA
€) [e]
Push REC and PLAY at the same
time on the recording Combination
VCR. Then, push PAUSE on the
remote immediately.
Push PAUSE on both units (at the
same time), to begin copying.
(4) Push PLAY on the playing VCR.
Edit Out Unwanted Parts of the original recording by using the
PAUSE button (on the Recording unit) while copying is in progress.
Then, ipud STOP on both units to
stop copying.
19
Advertisement
