Advertisement
Timer Recording
O
Daily and Weekly Timer Recording
If you want the program to be recorded daily
{Mon thru Еп), enter DAILY in place of the
DATE in step 2. If you want the recording to
C=
be on a weekly basis, enter WEEKLY MON,
PUSH SET >
To Make Corrections
Repeatedly push the SET button to move forward, or the CLEAR button to
move back to the desired item.
BN
`
Push PROG
to end
P DT STRAT
STOP
CH SPD
Al
. the program.
ae аасашиш
З ----:-----
эшш
цш
О
* |f you want to enter more
па
реа арра
- A programs, select
a blank program
SELECT 1-6 :PUSH A/Y KEY
number with the SELECT
Up/
CANCEL
:PUSH CLEAR
KEY
Down and SET buttons, and then
(END — :PUSH PROG
KEY
repeat steps 2 and 3.
:
Push PROG to exit
(Б) PROG
this mode.
-
• The PROGRAM TIMER indicator
lights on the front panel.
* if you're using a cable box, make sure that it is turned to the
desired channel and the power is left on for timer recording.
Two minutes before the Timer Recording starts, "TIMER REC WILL START
SOON" will appear on-screen.
If "PLEASE PREPARE FOR TIMER REC" appears and/or the PROGRAM TIMER indicator flashes, check that a
cassette with record tab is loaded and the Combination VCR is in Stop mode.
If the start times of two programs overlap, the lower numbered program will have priority.
If the start time for a timer recording comes up during a normal recording or One Touch Recording (page 15),
the timer recording will not be performed.
if there is a power interruption of more than one minute, the recording may not be performed or continue.
if "PROGRAM IS INCOMPLETE?" appears on-screen in step 4, check all entries and make necessary corrections .
Advertisement
