Table of Contents
Advertisement
CONNECTIONS
4 Connect the flat cable of the cassette deck to the
flat cable terminal of the receiver.
Pre-caution:
When connecting or disconnecting the flat cable, do so only
after disconnecting the power plug from the AC wall outlet.
5 Whenusing aturntable, connect the output cord
to the PHONO INPUT jacks of this unit.
For the U.S. and Canadian models, VIDEO INPUT jacks
are provided instead of PHONO
INPUT jacks.
When
connecting a video cassette recorder, connect the audio
output jacks to the VIDEO INPUT jacks of this unit.
6 Finally, connect the power cord to the AC wall
outlet.
NOTE:
Insert the plugs securely into the jacks. Improper connection
can lead to sound distortion or malfunction.
CONNECTING
THE POWER CORD
(For U.S. and Canadian models)
Household electrical outlets are provided with specific polarity, a
live side and a neutral (ground) side. This unit utilizes such polarity
in order to improve sound quality. As shown in the illustration, be
sure to insert the power plug so that its blades match the width
of slots in the outlet.
Household electrical outlets
H > Long slot is neutral
(ground) side.
Insert the wide blade
into the ground side
le"
slot.
ANTENNA CONNECTIONS
Radio reception is not possible unless the antenna is properly
connected.
The strength of broadcast signals varies from one area to
another. Signal propagation is especially poor in metropolitan
areas, where there are many tall buildings, andin mountainous
areas. Proper antenna installation is vital to good reception.
FM ANTENNA
FM indoor antenna
Stretch the antenna out to its full "T" shape, and affix it to a
wall, etc.
External FM antenna installation
Use an external antenna when the signals from stations are
weak and cannot be picked up by the accessory FM antenna,
or when the sound heard is accompanied by large amounts of
noise.
Canadian
models)
AM ANTENNA
The antenna should be placed ata distance from the tuner, and
should not be allowed to touch metallic objects. Avoid placing
it near CD players, personal computers, television sets, and
other devices generating radio frequencies.
External AM antenna
Indoor AM antenna
Prepare a vinyl-coated wire (5 to 6 meters long). Secure one
end tothe AM terminal and the other end to a wall or other high
location.
Outdoor AM antenna
If reception is still poor even when a lead antenna has been
fully extended indoors, stretch out a vinyl-coated wire and
secure it outdoors.
NOTE:
Do not detach the AM loop antenna when using an external
AM antenna.
,
Outdoor AM antenna
Indoor AM antenna
7
<RRB1089>
En
Advertisement
Table of Contents
