TIMER RECORDING
To check timer settings
TIMER
1
ET
SI;
REC
'f
1 Press TIMER SET.
2 Press REC (+) within five seconds.
3 After five seconds, the display changes to the
check mode, and timer settings are displayed in
order.
To change timer settings
To change all of the timer settings, start over again, inputting
the settings that you want.
To change only one of the timer settings (after pressing
TIMER SET and REC), press TIMER SET repeatedly until the
display shows the item that you wish to change. Then use
"—"and "+" to adjust the setting. Finally, repeatedly press
TIMER SET to advance to the end of the procedure.
If you make a mistake while setting the
timer
Go ahead to the next item and continue setting the various
items until you finish. Then use the "To change timer settings"
procedure to change the value of the item that was incorrect.
Turning the timer on and off
Confirm that the REC indicator is lit on the display.
About timer setting priority
ON time:
If REC timer and WAKE UP 1/2 timer are both at
the same ON times, REC timer takes priority.
OFF time: When
REC timer, WAKE
UP 1/2 timer and
SLEEP timer operate, earlier OFF time takes
priority.
35
<RRB1089>
En