Table of Contents
Advertisement
Display Control Unit Operation
E Names of Controls and Functions
The following description is based on the assumption
that this unit is connected to the optional CD changer
CX-DP801EUC, etc.
@ Reset Button
@ Disc Change Button
© Track/Search Up Button
fo
PEO OBTENAR J
© Repeat/Random Button
eid hdna e trek yea aia!
SL
f
© Power Button
O Track/Search Down Button
E For the first use
To reset this unit
Setting Transmitting Frequency
Use this unit for the first time, press the reset but- || 1. Switch on the power of your car FM radio.
ton when the Ignition is on.
2. Press PWR to switch on the power of display control
unit.
Note:
trol unit and installed it again.
Then, display changes to transmitting frequency.
e Press the reset button when this unit does not work || 4. Press <4
>> to change and select the frequency,
properly.
then press PWR to set.
ə Press the reset button to return intialization.
Set frequency away from public FM stations. (away
To press the reset button, use the slender and strong
more than 20.4 MHz)
stick.
Note:
When you make sure the transmitting frequency,
press and hold PWR for more than 2 seconds. And
press PWR again to return.
E Operating Procedures
1 To operate your car FM (stereo) radio
Switch on your car FM (stereo) radio.
2 Make sure the CD in the CD changer
3 To start disc play: PWR Button
è Press PWR on display contro! unit.
@ Set the radio as your selected frequency of display control unit.
Note:
When you make sure the transmitting frequency, press and hold PWR for more than 2 seconds. And press PWR
again to return.
4 To stop CD play (to switch to FM tuner) : PWR Button
Press PWR again to stop the CD playing. To listen a CD again, press PWR.
5 To select the disc : DISC Button
Press DISC sequentially advance to the next disc while disc plays.
Advertisement
Table of Contents
