Fisher & Paykel CG244D User Manual page 9

Adjusting the flame on the Dual wok burner
Both rings
1 Always start out on HI. Both rings of
flame will be on in the shaded setting
range.
Note: when turned all the way down, the
flame on the outer ring may appear to
come and go. If this occurs, adjust the
dial slightly back towards HI for a stable
outer ring.
IMpORTANT!
Turn the burner OFF and see 'Troubleshooting' for what to do next if you experience
any of the following:
There's a strong gas smell.
●●
The flame has been blown out by a draft
●●
or extinguished by a spill and does not
re-ignite.
●● There is no clicking/sparking or there is
clicking/sparking, but a burner or burners
won't light.
USING yOUR COOKTOP
2 To use the inner ring of flames only,
●●
●●
●●
Inner ring only
continue turning the dial towards LO.
Only the inner ring will be on in the
shaded setting range.
The flames don't burn all the way
around a burner, or some flames flicker.
The flame is yellow or yellow-tipped
rather than blue.
The flames are too large, small, irregular,
noisy or lift away from the burner.
EN
7