ECO2 Systems SANCO2 GS5-45HPC Owner's Manual page 21

valves, electrical switches, pumps, trace heating, fuses or any other field supplied parts used in the
2-7.
valves, electrical switches, pumps, trace heating, fuses or any other field supplied parts used in the
The Heat Pump Water Heater System must be sized to the hot water demand in accordance with the
installation of the Eco2 Systems LLC Heat Pump Water Heater system.
2-7.
The Heat Pump Water Heater System must be sized to the hot water demand in accordance with the
installation of the Eco2 Systems LLC Heat Pump Water Heater system.
guidelines in the current Eco2 Systems LLC Heat Pump Water Heater System literature and application
guidelines in the current Eco2 Systems LLC Heat Pump Water Heater System literature and application
guides and training information.
2-7.
The Heat Pump Water Heater System must be sized to the hot water demand in accordance with the
guides and training information.
2-7.
The Heat Pump Water Heater System must be sized to the hot water demand in accordance with the
guidelines in the current Eco2 Systems LLC Heat Pump Water Heater System literature and application
2-8.
guidelines in the current Eco2 Systems LLC Heat Pump Water Heater System literature and application
This warranty is for parts only, any and all labor costs associated with diagnosis, removal of the faulty
guides and training information.
2-8.
This warranty is for parts only, any and all labor costs associated with diagnosis, removal of the faulty
guides and training information.
part and installation of replacement parts will solely be the owner's responsibility except where covered
part and installation of replacement parts will solely be the owner's responsibility except where covered
by the labor warranty section of this warranty.
2-8.
This warranty is for parts only, any and all labor costs associated with diagnosis, removal of the faulty
by the labor warranty section of this warranty.
2-8.
This warranty is for parts only, any and all labor costs associated with diagnosis, removal of the faulty
part and installation of replacement parts will solely be the owner's responsibility except where covered
part and installation of replacement parts will solely be the owner's responsibility except where covered
by the labor warranty section of this warranty.
3. Warranty Exclusions
by the labor warranty section of this warranty.
3. Warranty Exclusions
Repair and replacement work will be carried out as set out in the Eco2 Systems LLC Heat Pump Water
Repair and replacement work will be carried out as set out in the Eco2 Systems LLC Heat Pump Water
Heater System warranty. However the following exclusions may void the warranty and may incur
3. Warranty Exclusions
Heater System warranty. However the following exclusions may void the warranty and may incur
3. Warranty Exclusions
additional service charges and/or cost of parts:
Repair and replacement work will be carried out as set out in the Eco2 Systems LLC Heat Pump Water
additional service charges and/or cost of parts:
Repair and replacement work will be carried out as set out in the Eco2 Systems LLC Heat Pump Water
Heater System warranty. However the following exclusions may void the warranty and may incur
Heater System warranty. However the following exclusions may void the warranty and may incur
3-1. Accidental damage to the Heat Pump Water Heater System or any component, including: Acts of God,
additional service charges and/or cost of parts:
3-2. On inspection of the failed system or part, and where it is found there is nothing wrong with the Heat
3-1. Accidental damage to the Heat Pump Water Heater System or any component, including: Acts of God,
additional service charges and/or cost of parts:
failure due to misuse, incorrect installation, attempts to repair the water heater other than by an Eco2
3-2. On inspection of the failed system or part, and where it is found there is nothing wrong with the Heat
Pump Water Heater System; where the complaint is related to excessive discharge from the temperature
failure due to misuse, incorrect installation, attempts to repair the water heater other than by an Eco2
3-2. On inspection of the failed system or part, and where it is found there is nothing wrong with the Heat
Systems LLC accredited service agent or the Eco2 Systems LLC service dept.
Pump Water Heater System; where the complaint is related to excessive discharge from the temperature
3-1. Accidental damage to the Heat Pump Water Heater System or any component, including: Acts of God,
and/or the pressure relief valve due to high incoming cold water pressure over 75 Psi; where there is no
3-2. On inspection of the failed system or part, and where it is found there is nothing wrong with the Heat
Systems LLC accredited service agent or the Eco2 Systems LLC service dept.
Pump Water Heater System; where the complaint is related to excessive discharge from the temperature
3-1. Accidental damage to the Heat Pump Water Heater System or any component, including: Acts of God,
and/or the pressure relief valve due to high incoming cold water pressure over 75 Psi; where there is no
3-2. On inspection of the failed system or part, and where it is found there is nothing wrong with the Heat
failure due to misuse, incorrect installation, attempts to repair the water heater other than by an Eco2
flow of hot water due to faulty plumbing; where water leaks are related to plumbing and not the Heat
Pump Water Heater System; where the complaint is related to excessive discharge from the temperature
and/or the pressure relief valve due to high incoming cold water pressure over 75 Psi; where there is no
failure due to misuse, incorrect installation, attempts to repair the water heater other than by an Eco2
flow of hot water due to faulty plumbing; where water leaks are related to plumbing and not the Heat
Pump Water Heater System; where the complaint is related to excessive discharge from the temperature
Systems LLC accredited service agent or the Eco2 Systems LLC service dept.
Pump Water Heater System or its components; where there is a failure of electricity or water supplies;
and/or the pressure relief valve due to high incoming cold water pressure over 75 Psi; where there is no
flow of hot water due to faulty plumbing; where water leaks are related to plumbing and not the Heat
Systems LLC accredited service agent or the Eco2 Systems LLC service dept.
Pump Water Heater System or its components; where there is a failure of electricity or water supplies;
and/or the pressure relief valve due to high incoming cold water pressure over 75 Psi; where there is no
where the supply of electricity or water does not comply with relevant codes or acts or is of the incorrect
flow of hot water due to faulty plumbing; where water leaks are related to plumbing and not the Heat
Pump Water Heater System or its components; where there is a failure of electricity or water supplies;
where the supply of electricity or water does not comply with relevant codes or acts or is of the incorrect
flow of hot water due to faulty plumbing; where water leaks are related to plumbing and not the Heat
voltage, phase and amperage as required by the system; Installation of the GS5-45HPC & GS5-45HPC-D
Pump Water Heater System or its components; where there is a failure of electricity or water supplies;
S A N C O 2 W a r r a n t y P o l i c y 0 1 - 0 1 - 2 0 2 3
where the supply of electricity or water does not comply with relevant codes or acts or is of the incorrect
voltage, phase and amperage as required by the system; Installation of the GS5-45HPC & GS5-45HPC-D
Pump Water Heater System or its components; where there is a failure of electricity or water supplies;
S A N C O 2 W a r r a n t y P o l i c y 0 1 - 0 1 - 2 0 2 3
heat pump(s) with other storage tanks that have not been specifically approved in writing by Eco2
where the supply of electricity or water does not comply with relevant codes or acts or is of the incorrect
voltage, phase and amperage as required by the system; Installation of the GS5-45HPC & GS5-45HPC-D
heat pump(s) with other storage tanks that have not been specifically approved in writing by Eco2
where the supply of electricity or water does not comply with relevant codes or acts or is of the incorrect
Systems LLC.
voltage, phase and amperage as required by the system; Installation of the GS5-45HPC & GS5-45HPC-D
heat pump(s) with other storage tanks that have not been specifically approved in writing by Eco2
S A N C O 2 W a r r a n t y P o l i c y 0 1 - 0 1 - 2 0 2 3
Systems LLC.
voltage, phase and amperage as required by the system; Installation of the GS5-45HPC & GS5-45HPC-D
heat pump(s) with other storage tanks that have not been specifically approved in writing by Eco2
S A N C O 2 W a r r a n t y P o l i c y 0 1 - 0 1 - 2 0 2 3
Systems LLC.
heat pump(s) with other storage tanks that have not been specifically approved in writing by Eco2
3-3. Where the Heat Pump Water Heater System or its component has failed directly or indirectly as a result
Systems LLC.
3-3. Where the Heat Pump Water Heater System or its component has failed directly or indirectly as a result
Systems LLC.
of excessive incoming water pressure above 75 Psi.
3-3. Where the Heat Pump Water Heater System or its component has failed directly or indirectly as a result
of excessive incoming water pressure above 75 Psi.
3-3. Where the Heat Pump Water Heater System or its component has failed directly or indirectly as a result
of excessive incoming water pressure above 75 Psi.
3-3. Where the Heat Pump Water Heater System or its component has failed directly or indirectly as a result
3-4. The factory supplied pressure relief valve or an ASME approved valve with the same pressure
of excessive incoming water pressure above 75 Psi.
3-4. The factory supplied pressure relief valve or an ASME approved valve with the same pressure
of excessive incoming water pressure above 75 Psi.
specification has not been installed or the valve outlet is blocked or corroded.
3-4. The factory supplied pressure relief valve or an ASME approved valve with the same pressure
specification has not been installed or the valve outlet is blocked or corroded.
3-4. The factory supplied pressure relief valve or an ASME approved valve with the same pressure
specification has not been installed or the valve outlet is blocked or corroded.
3-4. The factory supplied pressure relief valve or an ASME approved valve with the same pressure
3-5. Where the heat pump or storage tank has rusted or failed as a result of a corrosive atmosphere.
specification has not been installed or the valve outlet is blocked or corroded.
3-5. Where the heat pump or storage tank has rusted or failed as a result of a corrosive atmosphere.
specification has not been installed or the valve outlet is blocked or corroded.
3-5. Where the heat pump or storage tank has rusted or failed as a result of a corrosive atmosphere.
3-6. Where the unit fails to operate or fails because of ice formation in the piping to or from the Heat Pump
3-5. Where the heat pump or storage tank has rusted or failed as a result of a corrosive atmosphere.
3-6. Where the unit fails to operate or fails because of ice formation in the piping to or from the Heat Pump
3-5. Where the heat pump or storage tank has rusted or failed as a result of a corrosive atmosphere.
Water Heater System due the lack of Trace Heat cable, Freeze Protection Valve kit and a power outage
3-6. Where the unit fails to operate or fails because of ice formation in the piping to or from the Heat Pump
Water Heater System due the lack of Trace Heat cable, Freeze Protection Valve kit and a power outage
to the GS5-45HPC and GS5-45HPC-D Heat Pump. Suitably sized self-regulating trace heating must be
3-6. Where the unit fails to operate or fails because of ice formation in the piping to or from the Heat Pump
Water Heater System due the lack of Trace Heat cable, Freeze Protection Valve kit and a power outage
to the GS5-45HPC and GS5-45HPC-D Heat Pump. Suitably sized self-regulating trace heating must be
3-6. Where the unit fails to operate or fails because of ice formation in the piping to or from the Heat Pump
installed around the exposed supply and return piping to and from the heat pump including around the
Water Heater System due the lack of Trace Heat cable, Freeze Protection Valve kit and a power outage
to the GS5-45HPC and GS5-45HPC-D Heat Pump. Suitably sized self-regulating trace heating must be
installed around the exposed supply and return piping to and from the heat pump including around the
Water Heater System due the lack of Trace Heat cable, Freeze Protection Valve kit and a power outage
unit connections whenever the Heat Pump unit is installed in a location where the winter ambient
to the GS5-45HPC and GS5-45HPC-D Heat Pump. Suitably sized self-regulating trace heating must be
installed around the exposed supply and return piping to and from the heat pump including around the
unit connections whenever the Heat Pump unit is installed in a location where the winter ambient
to the GS5-45HPC and GS5-45HPC-D Heat Pump. Suitably sized self-regulating trace heating must be
temperature will fall below 27°F. Freeze Protection valves must be installed on the Cold Inlet and Hot
installed around the exposed supply and return piping to and from the heat pump including around the
unit connections whenever the Heat Pump unit is installed in a location where the winter ambient
temperature will fall below 27°F. Freeze Protection valves must be installed on the Cold Inlet and Hot
installed around the exposed supply and return piping to and from the heat pump including around the
Outlet piping within 6" from the piping connections to the Heat Pump unit.
unit connections whenever the Heat Pump unit is installed in a location where the winter ambient
temperature will fall below 27°F. Freeze Protection valves must be installed on the Cold Inlet and Hot
Outlet piping within 6" from the piping connections to the Heat Pump unit.
unit connections whenever the Heat Pump unit is installed in a location where the winter ambient
If a Power Outage occurs to the Heat Pump units at an ambient temperature that is either below 27°F or
temperature will fall below 27°F. Freeze Protection valves must be installed on the Cold Inlet and Hot
Outlet piping within 6" from the piping connections to the Heat Pump unit.
If a Power Outage occurs to the Heat Pump units at an ambient temperature that is either below 27°F or
temperature will fall below 27°F. Freeze Protection valves must be installed on the Cold Inlet and Hot
could drop below that 27°F ambient temperature at any time when the Heat Pump is not powered nor
Outlet piping within 6" from the piping connections to the Heat Pump unit.
If a Power Outage occurs to the Heat Pump units at an ambient temperature that is either below 27°F or
could drop below that 27°F ambient temperature at any time when the Heat Pump is not powered nor
Outlet piping within 6" from the piping connections to the Heat Pump unit.
have Freeze protection valves been installed on the piping, then potential freezing of the piping to and
If a Power Outage occurs to the Heat Pump units at an ambient temperature that is either below 27°F or
could drop below that 27°F ambient temperature at any time when the Heat Pump is not powered nor
have Freeze protection valves been installed on the piping, then potential freezing of the piping to and
If a Power Outage occurs to the Heat Pump units at an ambient temperature that is either below 27°F or
from plus internal piping and components of the Heat Pumps cannot be covered under warranty.
could drop below that 27°F ambient temperature at any time when the Heat Pump is not powered nor
have Freeze protection valves been installed on the piping, then potential freezing of the piping to and
from plus internal piping and components of the Heat Pumps cannot be covered under warranty.
could drop below that 27°F ambient temperature at any time when the Heat Pump is not powered nor
have Freeze protection valves been installed on the piping, then potential freezing of the piping to and
from plus internal piping and components of the Heat Pumps cannot be covered under warranty.
have Freeze protection valves been installed on the piping, then potential freezing of the piping to and
3-7. Where the Heat Pump Water Heater System is located in a position that does not comply with the Heat
from plus internal piping and components of the Heat Pumps cannot be covered under warranty.
3-7. Where the Heat Pump Water Heater System is located in a position that does not comply with the Heat
from plus internal piping and components of the Heat Pumps cannot be covered under warranty.
Pump Water Heater System installation instructions or relevant statutory requirements, causing the
3-7. Where the Heat Pump Water Heater System is located in a position that does not comply with the Heat
SANCO Heat Pump – Owner's Manual
2
Page 21 of 28
3 | P a g e
3 | P a g e
3 | P a g e
3 | P a g e