Table of Contents
Advertisement
Before First Use
•
Set the water softener level as required by the water hardness in the
area (see pages 13-14).
•
Add 1kg of salt into the salt compartment and then fill with water to the
top of the salt compartment.
Remove all the packaging materials from the interior of the dishwasher.
•
•
Fill the rinse aid compartment.
•
Run a hot programme without any dishes in the dishwasher.
Control Panel
Fig. 1
On/Off button
To switch the power to the dishwasher on or off, press the 'On/Off'
button (2). When you switch on the dishwasher, two dashes will
appear on the programme display (1).
Programme selection button
To select an alternative programme, press the 'Programme selection'
button (3) several times, until the programme display (1) shows the
desired programme. The dishwasher will store, in its memory, the last
programme used.
Programme
1
2
3
Half Load
Delay Timer
Half Load
4
5
6
7
Salt
Rinse Aid
8
7
Advertisement
Table of Contents
