Table of Contents
Advertisement
If the projector does not operate normally by following the operating instructions. Adjust only those
-
controls that are covered by the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the projector to
normal operation.
If the projector has been dropped or the cabinet has been damaged.
-
When the projector exhibits a distinct change in performance - this indicates a need for service.
-
When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Note for customers in the us
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to
local state or federal laws.
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local state
or federal laws.
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect
it from overheating, these openings must not be blocked or covered.
Caution
Hot air is exhausted from the exhaust vent. When using or installing the projector, the
-
following precautions should be taken.
Do not put any flammable objects, or spray can near the projector. Hot air is exhausted from
-
the air vents.
Keep the exhaust vent at least 1m away from any objects.
-
Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This
-
area will become hot while the projector is being used.
Do not put anything on the projector. Objects put on the cabinet will not only get damaged
-
but also may cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
-
The fan's running speed is changed according to the temperature inside the projector.
-
Caution
Contains mercury
For more information on safe handling procedures, the measures to be taken in case of accidental
breakage and safe disposal options visit:ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with applicable laws.
–vii –
Directive 2009/125/EC.
Advertisement
Table of Contents
