Eiki EK-401WA Owner's Manual page 6

Safety precautions
Caution:
The projector must be grounded.

Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock.

This projector produces intense light from the projection lens. Avoid staring directly into the lens,
-
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the
beam.
Place the projector in a proper position. Otherwise it may result in fire hazard.
-
Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool down
-
the projector. The figures below indicate the minimum distance to be left. It must be satisfied if the
projector is placed in sealed environment like a cabinet.
Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause dangers.
-
Remove the AC power plug if the projector is not to be used for a long time.
-
Caution
Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes in contact with oil or chemicals, it may become
deteriorated.
Read and keep this manual for future reference.
The mains plug/appliance coupler is used as disconnect device, the disconnect device shall
remain readily operable.
–v –