2. Spout Orientation
Bath
NOTE: Verify correct spout orientation before securing the base to the wooden
support.
NOTE: The base has a blue mark and a notch on the cold supply side.
Orient the base with the cold supply side notch placed in the direction shown.
If possible, dry fit the faucet to the base using the screws and washers. Orient the
spout to the inside of the bath.
If the faucet is not available at this time, verify that the base is positioned so water
from the spout will properly flow into the bath.
Mark the mounting-hole locations on the wooden support.
Mark the orientation of the base, and where the notch is positioned on the
wooden support.
1443292-2-B
Top View
Base
6
Hot
Pencil
Cold
Wall
Kohler Co.