Sony ICF-SW77 Service Manual page 11

Lw/mw/sw/fm stereo pll synthesized receiver
Hide thumbs Also See for ICF-SW77:
Table of Contents

Advertisement

The selected station is tuned m.
To receive a preset station on the Timer Page
The Station Name appears if it has one
(See page 23 for
1 Set POWER/LOCK to POWER.
2 Press ON/OFF.
The indications on the frequency display appear.
3 Press TIMER PAGE so that "TPn appears for the Page
number.
4 Select the the desired station from the 5 Station Names on
the Station selection line, and press the Station Number
button {SI, S2, S3, S4, or S5) for that Station Name.
14
The selected station is tuned in and the Station Name appears
on the display.
How to Select a Preset Frequency under a
single Station Name
Another important characteristic of the Preset Station Tuning
is that you can save up to 10 kinds of "Frequencies" under
one Station Name
Each "Frequency" can hold the following
types of data:
• band and frequency of the broadcast
• AM detection mode
• Program Time (broadcasting time or any desired time).
Note
The Timer Page can hold only one Frequency.
Memorizing Program Time for each Frequency enables the
following:
• The "ON AIR" indication (page 16) tells you whether it is the
broadcasting time for the station or the program
• The unit automatically selects the most appropriate station
to tune in among the 10 Frequencies.
Saving two or more Frequencies with different Program Times
under one Station Name is useful especially for SW reception.
The receiving condition of SW broadcast varies depending on
the season, time, and frequency. The same programs are
broadcasted at the same time using different frequencies so
that the listeners can choose the frequency with the best
receiving condition. The "best" frequency varies depending on
the area and the time.
For example. NSB has two frequencies; 3925 kHz, and 6055
kHz. Let s suppose that in a certain area, 3925 kHz is
received clearly in the morning, but in the afternoon, 6055 kHz
is received better. In this case, you can memorize two
"Frequencies" with different Program Times and frequencies
in one "Station Name."
You can program each Frequency with starting time and
ending time. However, you cannot turn the power of the radio
on and off by programming this time duration unless that
Station is on the TIMER PAGE and you set the timer (page
27).
Note
Since you can label the Station Name with any name, you can save 10 different
When this unit is shipped trom the factory, the Timer Page is not preset with
stations of the same category and name them "MUSIC', for example
This way.
Station Names
Refer to page 21 tor memorizing stations
you can find a station more quickly if you know what type of broadcast you want
15

Advertisement

Table of Contents
loading

Table of Contents