Il. Hardware Installation - Modecom MC-AWR11 User Manual

MODECOM ROUTER
. Remote managing through Telnet or HTTP
. Backup and restoration of configuration file
. Ethernet interface supporting crossover detection, auto-cor-
rection, and polarity correction
. Universal plug and play (UPnP)
Il. Hardware Installation
Step1
Connect the DSL interface of the device and the Modem interface
of the splitter through a telephone cable. Connect the phone to the
Phone interface of the splitter through a cable. Connect the incoming
line to the Line interface of the splitter.
The splitter has three interfaces:
= Line: Connect to a wall phone jack (RJ-11 jack).
= Modem: Connect to the ADSL jack of the device.
= Phone: Connect to a telephone set.
Step 2
Connect the LAN interface of the device to the network card of the
PC through an Ethernet cable (MDI/MDIX).
$ Note:
Use twisted-pair cables to connect with the hub or switch.
Step 3
Plug one end of the power adapter to the wall outlet and connect
the other end to the Power interface of the device.
Connection 1
Figure 1 shows the application diagram for the connection of the
router, PC, splitter and the telephone sets, when no telephone set is
placed before the splitter.