Status; System; Lan - Modecom MC-AWR11 User Manual

MODECOM ROUTER
m Note:
If the WAN connection type is set to 1483 MER: Static IP, the
parameters of the WAN connection type are the same as that of 1483
Routed. For the parameters in these pages, refer to the parameter
description of 1483 Routed.
Click BACK to modify the settings.
Click FINISH to save the settings.
Click RESET to cancel the settings
3. Status
In the navigation bar, choose Status. In the Status page that is
displayed contains: System, LAN, WLAN, WAN, Port Mapping, Sta-
tistics, and ARP Table.
3.1 System
Choose Status > System. The page that is displayed shows the
current status and some basic settings of the router, such as software
version, DSP version, uptime, upstream speed, and downstream
speed.
status Wirard tus Network Serice Advance Admin 'Diagnostic
System ta wan WAN PoriMapping Statistics ARP Table
System Status
3.2 LAN
Choose Status > LAN. The page that is displayed shows some
basic LAN settings of the router. In this page, you can view the LAN IP